Peplink Balance 2500

Tài Khoản
- Đăng Ký
- Đăng Nhập

Peplink Balance 2500

Danh mục sản phẩm

Peplink Balance 2500

/ 0 Bình luận

Giá bán: Liên hệ

Nhà sản xuất: Peplink
Dòng sản phẩm: Thiết bị cân bằng tải Peplink
Tình trạng hàng hóa: Liên hệ

Thiết bị cân bằng tải Peplink Balance 2500 (BPL-2500)
- Multi-WAN Router (12 GE WAN)
- Designed for Enterprise/Datacenter/Campus
- 12x GE WAN, 8x GE LAN
- 1U 19" Rackmount Chassis
- Dual Hot Swap PSU
- 8Gbps throughput

Mô tả
Đánh giá (0)

TÍNH NĂNG KỸ THUẬT

12 WAN Ports

20000 users

8 Gbps Throughput

4000 VPN Peers

Cellular	No
Ethernet WAN	12 (GE)
Ethernet LAN	8 (GE)
Stateful Firewall Throughput	8 Gbps
PepVPN Throughput (No Encryption)	2 Gbps
PepVPN Throughput (256-bit AES)	2 Gbps
SFP LAN/WAN	No
Wi-Fi AP	No
USB	1
Recommended Users	5000-20000
Number of PepVPN/SpeedFusion Peers	4000
Maximum Number of AP Supported	1500
SpeedFusion Hot Failover	Yes
SpeedFusion WAN Smoothing	Yes
SpeedFusion Bandwidth Bonding	Yes
Central Management	InContol 2
Drop-In Mode	Yes
High Availability	Yes
Content Filtering (Lite/Full)	Full
Pepwave AP Series Management	Yes
Remote AP & Multiple Config Profiles Management	Yes
LAN Bypass	Yes
Remote User Access	Yes
802.1q VLANs Supported	1024
Port-Based VLAN	Yes
Load Balancing & Failover	Yes
Load Balancing Algorithms	8
Inbound Load Balancing	Yes
InControl Cloud Management	Yes
WAN	Support for PPPoE, Static IP, DHCP WAN Link Health Check PING DNS Lookup HTTP Bandwidth Allowance Monitor IPv6 Support USB 4G/3G Modem Support Support for Dynamic DNS services changeip.com dyndns.org no-ip.org tzo.com DNS-O-Matic WAN Port Convertible into LAN Port
LAN	DHCP Server for LAN Clients Extended DHCP Option DHCP Reservation DNS Proxy for LAN Clients VLAN on LAN Support
Load Balancing	Intelligent Failover Session Persistence Per-Service Load Distribution Multiple Algorithms -Weighted -Enforced -Persistence -Priority -Overflow -Least Used -Lowest Latency
Security	DoS Prevention Stateful Firewall Web Blocking
VPN	PepVPN/SpeedFusion Bandwidth Bonding -Site-to-Site VPN -Bandwidth Aggregation -Hot Failover -256-bit AES Encryption -Pre-shared Key Authentication -Dynamic Routing -X.509 Certificate Support PPTP/L2TP/OpenVPN Server -Local User, LDAP, RADIUS, Active Directory Authentication IPsec VPN (Network-to-Network) -X.509 Certificate Support GRE Tunnel (Network-to-Network)
Advanced QoS	User Groups -Bandwidth Reservation -Individual Bandwidth Limit Application Prioritization -By User Groups -SIP, HTTPS, VPN QoS -Custom Application QoS
Networking	NAT and IP Forwarding Static Routes Port Forwarding Many to One, One to One NAT NAT Pool SIP ALG, H.323 ALG UPnP, NAT-PMP WINS Server BGP, OSPFv2 and RIPv2 Support Bonjour Forwarding
AP Controller	Support for Pepwave AP Series Auto AP Discovery Auto AP Firmware Management AP Profile Configuration Wi-Fi Usage Statistics
Captive Portal	Support for Wired and Wireless LAN Clients Support RADIUS Authentication Support LDAP Authentication Time and Usage Quotas on Open Access Mode Built-in Customizable Splash Page
DNS	Built-in Authoritative DNS -Support for A, CNAME, NS, MX, PTR, SOA, SRV, TXT Records
Device Management	Web Administrative Interface Command Line Interface InControl Cloud Management Email Notification Active Client & Session Lists Bandwidth Usage Statistics Syslog Service SNMP v1, v2c and v3
Power	Universal Input 100V – 240V AC

Thông tin đặt hàng

BPL-2500	Balance 2500	(For copper-based LAN). Equipped with 8 (GE) LAN ports and supporting LACP (802.3ad) NIC bonding.
BPL-2500-SFP	Balance 2500	(For fiber-based LAN). Equipped with two 10G SFP+ LAN ports. See a list of compatible SFP+ modules here.
BPL-2500-2SFP	Balance 2500	Equipped with two 10G SFP+ WAN ports, four (GE) WAN ports, and two 10G SFP+ LAN ports. See a list of compatible SFP+ modules