Mã sản phẩm

EJ1600 v2

Form Factor

3U rackmount

Host Interface

3 SAS (one input, one output,  one reserved) 12Gbps for each controller, 4x port

LED Indicators

System Power LED (Blue): on/off
System Status (Green/ Red): in operation, system errors, low power, disk lost, disk failure, system performing take-over, power supply unit unplugged
LCD Status Display (Two-digit number): Status of JBOD connection

Buttons

Power / Reset

Dimensions (HxWxD)

132 × 446.2 × 618m

Weight

24.11 kg

Max. number of HDDs/SSDs supported

16

Hard Drive Type

3.5" SAS12/6Gb/s, hard drive or 2.5" SAS SSD

Operating temperature

0 - 40 °C (32°F - 104°F)

Storage Temperature

-20 - 70°C (-4°F - 158°F)

Relative Humidity

5~95% RH non-condensing, wet bulb: 27˚C

Power Supply Unit

Redundant/ Hot Swap ATX Power Supply, 450W, 90-240Vac~, 50-60Hz

Power Consumption: Operating Mode, Typical

344.19 W

Fan

Hot-swappable fan module (60*60*38mm; 16000RPM/12v/2.8A x 3)

Management

The functions listed below are managed via the QNAP QES operating system.

Support for hard disk’s S.M.A.R.T. capacity
RAID expansion enclosure LED identifier
Location indication of RAID expansion enclosure
Location indication of hard disks on RAID expansion enclosure
Smart fan control
In-band firmware update
The disks, RAID Groups, storage pools, and volumes in the RAID expansion enclosures are configured via the QES operating system.

Upto 1PB Single Volume
Support for multiple RAID groups in a storage pool to ensure data safety
Online storage pool expansion
Online volume expansion
Block-based iSCSI LUN
Support for thin-provisioned volume with space reclamation
Support for thin-provisioned iSCSI LUN with space reclamation